2013 (4) April (1) March (2) February (1) 2012 (6) October (4) HPI Cup Racer Front One Way Mods Shop

Some additional grinding, and the Eagle Racing TT-01 one way fits!  widen the axle cup openings The dogbone pins are too thick to fit the drive cups. Use a Dremel sanding disk to slowly remove material. Check often until you have a smooth fit. I ended up with a bit of slop on the pins, and will move to blades when they wear in.   bulk sea glass for sale Plunge and enlarge the center hole After the fit is good, a new obstacle presents itself - the dogbone is too wide to fit into the axle cup. Use a tapered or other Dremel grinding stone to enlarge the cup center bore. Again, go slowly and check fit often. check for binding before install
2013 (4) April (1) March (2) February (1) 2012 (6) October (4) HPI Cup Racer Front One Way Mods Shopping List Modding the HPI Cup Racer for a Front One Way, par... Modding the Cup Racer for a Front One Way, part 2 Modding the Cup Racer for a Front One Way, part 1 September (2)
WIP Bodies • toyota Celica 1600 GT
Akihabara RC shops mega list Chance Circtui West Tokyo (Nishi Tokyo 西都居） RC Oahu Waru Circuit Max-One RC Area Tokyo Japan national listing of tracks by track type Step Up - Oita prefecture RC Oahu